Grandstream UCM6510 IP PBX System
₦858,700.00
- 2 FXO Ports
- 2 FXS Ports
- Dual Gigabit ports with PoE
- 1 T1/E1/J1 Port
- Description
- Reviews (0)
- Specifications
The Grandstream UCM6510 IP PBX redefines communication technology for businesses of all sizes. With its comprehensive capabilities in voice, video, data, and mobility, this enterprise-grade solution stands out in today’s fast-paced digital landscape.
Powerful
At the heart of the UCM6510 lies a powerful 1GHz quad-core Cortex A9 processor, complemented by 1GB of DDR3 RAM and 32GB of flash memory. This combination delivers exceptional performance, supporting up to 2000 users and 200 SIP trunk accounts with ease. Users can enjoy up to 200 concurrent calls and host conferences with up to 64 participants. The integrated T1/E1/J1 interface, two PSTN trunk FXO ports, and two analog telephone/Fax FXS ports ensure compatibility with various telephony systems. Gigabit network ports with integrated PoE simplify installation, while advanced security features, including SRTP, TLS, and HTTPS with hardware encryption, safeguard sensitive communications.
User-Centric Usability
The UCM6510’s design marries functionality with aesthetic appeal, presenting a sleek and modern interface that enhances user interaction. Its intuitive web user interface streamlines setup and management, allowing for quick provisioning of Grandstream endpoints through Auto-Discovery and Zero Config features. This focus on usability ensures that users can effortlessly navigate and maximize the system’s robust features without extensive technical knowledge.
Frequently Asked Questions
Is UCM6510 discontinued?
Yes, the UCM6510 has been discontinued. Grandstream, the manufacturer, no longer produces this model, but support and documentation are still available.
What is the default username and password for UCM6510
The default username for the UCM6510 is "admin," and the default password is "admin." It’s recommended to change the password after your first login for security reasons.
What ports are on the UCM6510?
The UCM6510 has various ports, including 2 FXS ports for analog phones, 2 FXO ports for analog lines, 1 T1/E1/J1 port, 1 RS232 port, and 2 Gigabit Ethernet ports.
Only logged in customers who have purchased this product may leave a review.
Interfaces
- Analog Telephone FXS Ports 2 RJ11 ports (both with lifeline capability in case of a power outage)
- PSTN Line FXO Ports 2 RJ11 ports (both with lifeline capability in case of a power outage)
- T1/E1/J1 Interface 1 RJ45 port
- Network Interfaces Dual Gigabit ports (switched or routed) with PoE; A 3rd Gigabit port for Hot-Standby Clustering
- NAT Router Yes (user configurable)
- Peripheral Ports USB, SD
- LED Indicators Power 1/2, PoE, USB, SD, T1/E1/J1, FXS 1/2, FXO 1/2, LAN, WAN, Cluster Heartbeat
- LCD Display 128×32 dot matrix graphic LCD with DOWN and OK buttons
- Reset Switch Yes, long press for factory reset and short press for reboot
Voice/Video Capabilities
- Voice-over-Packet Capabilities LEC with NLP Packetized Voice Protocol Unit, 128ms-tail-length carrier grade Line Echo Cancellation, Dynamic Jitter Buffer, Modem detection & auto-switch to G.711
- Voice and Fax Codecs G.711 A-law/U-law, G.722, G.723.1 5.3K/6.3K, G.726, G.729A/B, iLBC, GSM, AAL2-G.726-32, ADPCM; T.38
- Video Codecs H.264, H.263, H263+
- QoS Layer 3 QoS, Layer 2 QoS
Signaling & Control
- In Audio, RFC2833, and SIP INFO In Audio, RFC2833, and SIP INFO
- PRI, SS7, MFC/R2, RBS (pending) PRI, SS7, MFC/R2, RBS (pending)
- Provisioning Protocol & Plug-and-Play TFTP/HTTP/HTTPS, auto-discovery & auto-provisioning of Grandstream IP endpoints via ZeroConfig (DHCP Option 66/multicast SIP SUBSCRIBE/mDNS), eventlist between local and remote trunks
- Network Protocols TCP/UDP/IP, RTP/RTCP, ICMP, ARP, DNS, DDNS, DHCP, NTP, TFTP, SSH, HTTP/HTTPS, PPPoE, SIP (RFC3261),
- STUN, SRTP, TLS, LDAP, HDLC, HDLC-ETH, PPP, Frame Relay (pending)
- Disconnect Methods Call Progress Tone, Polarity Reversal, Hook Flash Timing, Loop Current Disconnect, Busy Tone
Security
- Media Encryption SRTP, TLS, HTTPS, SSH
- Advanced Defense Fail2ban, alert events, Whitelist, Blacklist, strong password based access control
Physical Specs
| Input | 100 ~ 240VAC, 50/60Hz |
| Output | DC+12V, 1.5A |
| Physical Unit Weight | 2.165 kg |
| Package Weight | 3.012 kg |
| Dimensions | 440mm(L) x 185mm(W) x 44mm(H) |
| Environmental Operating | 32 – 113ºF / 0 ~ 45ºC, Humidity 10 – 90% (non-condensing) |
| Storage | 14 – 140ºF / -10 ~ 60ºC, Humidity 10 – 90% (non-condensing) |
| Mounting | Rack mount & Desktop |
Other Features
- Multi-Language Support English/Simplified Chinese/Traditional Chinese/Spanish/French/Portuguese/German/Russian/Italian/Polish/Czech for Web UI; Customizable IVR/voice prompts for English, Chinese, British English, German, Spanish, Greek, French, Italian, Dutch, Polish, Portuguese, Russian, Swedish, Turkish, Hebrew, Arabic
- Caller ID Bellcore/Telcordia, ETSI-FSK, ETSI-DTMF, SIN 227 – BT, NTT Japan (pending)
- Polarity Reversal/Wink Yes, with enable/disable option upon call establishment and termination
- Call Center Multiple configurable call queues, automatic call distribution (ACD) based on agent skills/availability/work-load, in-queue announcement
- Customizable Auto Attendant Up to 5 layers of IVR (Interactive Voice Response)
- Maximum Call Capacity Up to 2000 registered SIP endpoints, up to 200 concurrent calls
- Conference Bridges Up to 8 bridges, up to 64 simultaneous conference attendees
- Compliance FCC: Part 15 (CFR 47) Class B, Part 68 CE: EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, EN60950-1, TBR21, RoHS CE: EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, EN60950-1, TBR21, RoHS ITU-T K.21 (Basic Level); UL 60950 (power adapter) T1: TIA-968-B Section 5.2.4 E1: TBR12/TBR13, E1: AS/ACIF
There are no reviews yet.